Strap fitting guide

Find your size. Fit it in a minute.

Every Bridge strap fits every Apple Watch. Pick the size that matches your watch, slide it on, and you're done.

Which size do I need?

Choose the size option that matches your watch below. Your case size is engraved on the back of your Apple Watch.

Choose this size If you have

Apple Watch Ultra 49mm

Every Apple Watch Ultra: Ultra, Ultra 2 and Ultra 3

46mm Series 10/11/12 Apple Watch

Series 10, 11 or 12 with a 46mm case

42mm Series 10/11/12 Apple Watch

Series 10, 11 or 12 with a 42mm case

42/44/45mm Apple Watch

Series 7, 8 or 9 with a 45mm case

Series 4, 5, 6 or SE with a 44mm case

The original Apple Watch or Series 1, 2 or 3 with a 42mm case

38/40/41mm Apple Watch

Series 7, 8 or 9 with a 41mm case

Series 4, 5, 6 or SE with a 40mm case

The original Apple Watch or Series 1, 2 or 3 with a 38mm case

Got a 42mm watch? Check which one

On Series 10, 11 and 12, 42mm is the smaller case, so choose "42mm Series 10/11/12". On the original Apple Watch and Series 1 to 3, 42mm is the larger case, so choose "42/44/45mm".

How to check your model

On your iPhone, open the Watch app, tap My Watch, then go to General › About to see your model. The case size is also engraved on the back of your watch.

Ordered the wrong size? You can return it unworn and in its box within 15 days.

The Helm sailcloth strap fitted to an Apple Watch Ultra with matching adapters

Fit your strap

No tools needed. Choose silver or black adapters when you order to match your case.

  1. 01

    Remove the old strap

    Turn your Apple Watch face down on a soft surface. Press and hold the small release button on the underside, next to the strap slot, and slide the strap out sideways. Repeat for the other side.

  2. 02

    Slide in your Bridge strap

    Slide each half of your new strap into its slot until it clicks into place. It should sit firmly with no movement. If you don't hear a click, slide it out and try again: a loose strap can come away.

  3. 03

    Check the fit

    Give each side a gentle tug to make sure it's secure, then fasten it on your wrist. You should be able to slide one finger comfortably under the strap.

Caring for your strap

  • Leather

    Avoid prolonged contact with water and wipe dry after any splashes. Condition every few months with a good leather conditioner.

  • FKM rubber

    Fully water resistant. Rinse with fresh water after exercise or a swim in the sea, then dry with a soft cloth.

  • Silicone

    Wash with mild soap and warm water, then leave to air dry.

Still not sure?

Email us with your watch model and we'll tell you exactly which size to order.