Skip to content
Buy any 2 Straps, Get a 3rd Free
Rated Excellent on Trustpilot
As Seen in GQ, WIRED & more.
Quiet Luxury for the Modern Wrist
Skip to product information
1 of 4

The Guard

The Guard

Ultra-Tough Watch Protection Case

Regular price $119.00
Regular price Sale price $119.00
In stock, ready to ship
Ships Monday, 24 August Express to United States
Our Standard
Designed in Britain
Our Warranty
Covered for 2 years
Our Gift Box
Luxury Unboxing

Inspired by the steadfast strength and unwavering dedication of the Royal Guard, The Guard is the ultimate travel and protection case for your watch collection.

Designed to shield your timepieces with military-grade protection, this case ensures maximum safety whether you're travelling or simply storing your watch. 

A collaboration between The Bridge & Watch Cache. 

Materials

Acrylonitrile Butadiene Styrene (ABS) - an impact-resistant engineering thermoplastic.

Extra thick foam interior

Dimensions

  • The case fits 3 watches.
  • External Dimensions: L 214mm x W 172mm x H 90mm
  • Internal Dimensions: L 190mm x W 126mm x H 75mm

Care information

Throw anything at it.

It needs no care, it does the caring.

Shipping & Returns

UK Delivery in 2-3 working days.

Worldwide Delivery between 5-7 working days.

Case comes with a 5-Year Guarantee.

We also offer a 100% Money Back Guarantee. If you are not satisfied with the product, you get your money back.

Product Specifications

Product Specifications

  • IP67 Rated for Water & Dust Resistance (Submersion at 3ft for 30 min)
  • Rubber ‘O-Ring’ Seal for Water Resistance
  • Pressure Release Valve
  • Two Moulded Padlock Hasps
  • Thick Wall Construction
  • 5-year Guarantee
View full details

Fitting

Adjusting the Presidential

Animated diagram: a top view and an edge view of the strap, showing the pin tool pressing into a release hole to free a link.

Removing a link from the titanium strapTop view of three links with the pin tool pressing into a release hole, and an edge view below showing two holes on each side link. release hole pin tool EDGE VIEW — TWO HOLES PER SIDE LINK

Count the links first

Take links out in pairs, one from each side of the clasp.

Step 1 / 6
  1. Work out how many links to remove. Each link is roughly 5 mm. Take the same number from both sides of the clasp so it stays centred on your wrist.
  2. Find the holes, not the seams. Turn the strap on its edge. Each side link shows two small holes, set in from its ends — that is where the pins sit.
  3. Press the pin straight in. Put the supplied tool into the hole and push square to the strap. One pin runs the full width, so the hole on the opposite edge is the same pin.
  4. Ease the two halves apart. Keep the pressure on and separate them sideways rather than pulling lengthways.
  5. Release the second pin. Each link is held at both ends, so repeat at the next hole along to free it completely.
  6. Close the strap up. Line the ends up, press the pin, push together until it seats, then tug firmly from both ends before wearing.

Work over a cloth so a loose pin cannot roll away, and keep the removed links with the tool. If a pin will not move under steady pressure, stop — a jeweller will do it on a bench block without marking the titanium.

"The Guard doesn't leave my side during travels. It was an investment in my peace of mind."

Peter - London, United Kingdom

Military grade protection.

A combination of impact resistant ABS engineering thermoplastic & thick foam walls on every side.

Nothing reaches your prize possessions.

Air tight.

Our pressure release valve allows you to ensure an air tight fastening of your case in humid environments.

Also great for plane travel and changing cabin pressures.

IP67 Water Resistant

We went to great lengths with the Watch Cache team to ensure this case can be fully submerged upto 3m for 30 minutes.

Case falls off the side of the boat? No problem (Floats too...)

Locked in.

2x moulded thermoplastic padlock hasps ensure you can double up protection with a heavy duty locks of your choice.